Thyme to show you a Warm and Wooly Mitten Box

Today I wanted to show you a project 

called 

Warm and Wooly Mitten Box

Design by Cynthia Erekson

We have not had much snow this winter on Cape Cod

 however 

we did get a few inches of the "white stuff" last night. 

So I guess I completed this project just in time to store my mittens and keep them handy.

This design can be found in the February 2011 Issue of Paint Works

This box measures about 15 1/2" X 6 1/2" X 7"

Lets step inside my STUDIO and get started

My Palette

Antique Maroon, Antique Teal, Antique White, Autumn Red, Black Green, Brandy Wine, Buttermilk, Calico Red, Colonial Green, Dark Chocolate, Honey Brown, Lamp Black, Light Buttermilk, Milk Chocolate, Warm White

Lets Paint!

I began by applying Multi Purpose Sealer to all outside surfaces of the box.

I used a large American Decor Brush to apply sealer.

I let the sealer dry then lightly sanded my surface. 

Wipe any dust.

I base coated the outside of the box with 2 coats of Autumn Red.

I base coated the bottom of the box with Lamp Black.

The knob is first base coated with Antique Teal and then Lamp Black.

On the top of the box I measured and drew a line 1 1/2" from all edges to create a wide border.

I randomly dry brushed Calico Red onto the top border and sides of the box.

This brighter color adds more depth to the wood graining that we will be doing.

I painted a coat of Antique Teal over the Autumn Red 

center rectangle on the box cover and lid sides.

Wood Graining Glaze

Mix a glaze with a quarter size puddle of Black Green, 3 drops of Lamp Black, 6 quarter size puddles of  Glaze Medium 1 drop of Black Green and 3 good squirts of Extender.

Press the glaze on with the broad flat side of a sponge brush.

The glaze should just cover the base coat and look slightly bubbly.

I worked quickly with my palette knife held in a vertical position. 

I used a press and lift motion repeatedly in the glaze all along sides of box lid. 

Lid Center Rectangle

I used the sponge brush to press glaze onto the center rectangle of the lid.

I then pulled my graining tool quickly thru the glaze.

I wiped my tool on a paper towel and once again pulled the tool thru the glaze. 

Lid Outer Border

I pressed the glaze onto the entire outer border.

I again used my palette knife in a press and lift motion all along the outside border.

I moved quickly around the lid and angled the knife at the corners.

Let dry completely before proceeding!

Close up of the cover grain work.

The sides of the box are wood grained as well in much the same manner.

I measured and taped off a 1/2" border around the top of the box.

I used a small stencil brush to "dry brush" on the boarder with Lamp Black.

I measured and applied a 1/2" wide Lamp Black border 

around the lid top as well as the top and bottom edges of the box.

Side view.

I also measured and taped off the 1/8" border on lid rectangle. 

I again used a small stencil brush to dry brush this border with Honey Brown.

I painted the inside of the box Lamp Black.

I used a small stencil brush  to dry brush Lamp Black along the edges of the box lid.

I used an awl to punch random sections of the box creating groupings of wormholes.

I also used a rasp to remove some paint from the corners and edges of the box to distress them.

In order to mellow the color of the box some 

I mixed Honey Brown with some Staining and Antiquing Medium

I brushed the "antique mixture" on to the box to tone the color down.

I transferred the oval design to the box and base coated it with Honey Brown.

Once that area had dried I used a horizontal motion and lightly sanded the area.

Next I painted the sheep.

I used a small detail brush to line the branches, leaves and other tiny details.

I added the lettering 

WARM AND WOOLY MITTENS

AND 

 the date

1846 

to the side of the box lid.

"These sweet and peaceful sheep were inspired by a piece of Early American chalk ware. These 18th and 19th century figurines were molded from plaster of Paris and painted in a primitive style. It is thought that the designs were taken from decorative Staffordshire figures and other forms of pottery  popular at the time. " 

~ Cynthia Erekson

I covered the oval area and lightly spattered the box with Lamp Black

Spattering

Pour a quarter size puddle of paint on your palette. 

Dip your stencil brush in H20 and dab on paper towel. 

Swirl your brush in the paint and use a palette knife to flick the bristles, pulling them toward you with your palette knife.

I used a lettering brush to do the checks around the oval center in Black Green.

For easy spacing, place one check at each end, one at top center and one at bottom center.

Place another check halfway between each of these checks. Continue to divide the available space in each section in 1/2 . The checks fit perfectly!

I applied several coats of Dura Clear Varnish to complete my project.

Rosemary Reynolds and DecoArt

provided me with the paints

 and 

products to complete this project as part of their 

Helping Artist

and 

Blogger Outreach Programs

Thank you DecoArt!

I hope you have enjoyed watching me paint my

Warm and Wooly Mitten Box

Happy Painting!

Lynn

Thyme to show you a Boston Anglers Box

Today

 I wanted to show you my latest project.

This project is 

called

Boston Anglers Box

Design 

by

Cynthia Erekson

I used a reproduction 

"Vintage Shoeshine Box"

to paint this project on.

Lets step inside my STUDIO and get started!

My palette

DecoArt Americana Acrylics

Blue Haze Light, Camel, Graphite, Lamp Black, Bleached Sand, Ice Blue, Raw Sienna

I began by lightly sanding my surface and then removing any dust.

Often times on a project such as this

 I combine

Multi-Purpose Sealer 

with my

base coat.

I poured Graphite plus a small amount to Lamp Black

onto my palette and mixed well 

with a

  palette knife.

I used this mixture to base coat the inside and underside 

of the box with a small

 American Decor Flat Brush

I base coated all outer surfaces 

with a heavily textured coat 

of 

Blue Haze Light.

I use the broad flat side of a 2" sponge brush heavily loaded with paint.

I then "press and lift" the paint on to my surface.

I then go back over the surface pressing the brush
to reduce the texture and refine the surface a bit.

This is important especially in the areas that you will be painting your design.

It will make detail painting easier!

The box sides can be left coarser.

Let surface dry.

Next I dampened a silk sponge.

I then squeeze it on a paper towel to remove excess water.

I then dipped my sponge in Ice Blue.

I lightly pounced the sponge over all outer surfaces for subtle mottling.

 I let the box dry well.

I measured in 1" from all sides on both sections of the top.

I painted the 1" borders with Graphite leaving some background color showing through.

Next, I loaded a small stencil brush with Graphite.

I scrubbed the brush on a paper towel to remove most of the paint.

I then lightly  scrubbed the brush on the outer edges and hinges on top of the lid sections.

I added some soft darker areas to the lower box shading at the corners, edges and bottom of legs. 

I let the box dry completely then lightly spattered it with thinned Graphite.

I began by transferring the ground and water lines to the surface.

I then started to paint the "angler" and add other details.

Adding foliage to tree and the weeds.

Close up view.

I used

 a

DecoArt Stencil 

called 

Anchors Aweigh 

to enhance the sides of my box.

This is a re-usable stick on stencil!

Close up of stenciled side of box.

I base coated the 2 trout with Lamp Black plus Graphite.

I used thinned paint and left some raw wood showing.

I heavily sanded edges and across body to wear off streaks of paint.

I attached the 

Fish Dealer Label 

to the box 

with 

Decou-Page

I applied the medium to the back of the label .

I then pressed it in place.

I let the label dry completely.

Once the label had dried

 I applied another 2 coats of

 Decou-Page 

to the top of label.

Let dry completely between coats.

I then dabbed a wash of Raw Sienna, here and there on label to age it.

I brushed on several coats 

of

 Dura Clear Soft Touch Varnish

Top of box

I like to finish the inside of my boxes as well.

I had this wonderful 

"fish" scrap book paper 

in my stash.

I measured all the insides of my box.

I cut all the pieces to fit using a paper cutter.

I then used 

Decou-Page 

in the same manner as above

 to adhere the paper to the insides of the box.

Inside the box!

I painted the inside of the top cover

 with 

DecoArt Chalk Board Paint

I used

 a 

Generals Charcoal White Pencil 

to do the lettering and design.

I use a 

point blend brush 

dipped in a small amount of water 

to clean up any smudges left by the chalk pencil.

***** You MUST spray any chalk work with Fixative Spray before varnishing*****

This step will prevent any chalk work from smudges once you varnish.

Inside of box.

Something fishy going on here!

I glued the trout to the sides of box.

Side of box.

Another side view of box.

Rosemary Reynolds

 and 

DecoArt 

provided me with the paints to complete this project

as part of 

their 

Helping Artist

and

Blogger Outreach Programs.

Thank you DecoArt!

I hope you have enjoyed watching me paint this

Boston Anglers Box

Happy Painting!

Lynn