Friday, May 26, 2017

Thyme to show you a Seaside Santa Dummy Board


We have seen some warmer weather here on 
Cape Cod 
but
Mother Nature still hasn't decided if she wants it to be warm or cold!


The rainy days give me a chance to get some painting done.


Lets head into the STUDIO to see what I have been working on.


Today I wanted to show you a project 
called 
Seaside Santa

The surface piece measures 30" H x 11" W. It is cut from 3/4" pine.

The fish decoys are about 7" x 1 3/4".

Design by Cynthia Erekson



My Palette



Dove Gray, Medium Flesh, Midnight Blue, Honey Brown, Milk Chocolate, Lamp Black, Heritage Brick, Light Buttermilk, Neutral Gray, Shading Flesh, Wedgewood Blue

Let's get started!



I began by sealing my piece with Americana Decor Stain Blocker/ Sealer


As you can see my surface piece had a few large wood knots in it. 
If you don't seal a piece like this properly you risk the chance of these spots 
resurfacing and discoloring 
your finished piece.





I applied the stain blocker with a brush 
and 
let it dry well before proceeding to the next step.




I applied a coat of 
first before base coating my 
fish decoys .

I mixed Midnite Blue with Lamp Black to create "Deep Navy Blue".
 this was used on the coat and fish. 

The other 2 fish were base coated with Light Buttermilk and Heritage Brick.




I added the designs to the fish and distressed them.
I transferred the main details of the pattern to my surface using graphite paper.


I painted the hat and sleeve trim with the "Deep Navy Blue" mix I made.


The coat trim is finished.

I will now start working on the face and beard.


I base coated the beard with Neutral Grey
I let that dry then dipped a stencil brush into the Neutral Grey first then Light Buttermilk.
I circled my brush on a paper towel to dry the bristles slightly.





I pounced the textured color onto the beard with the stencil brush leaving about 1/8" of Gray showing around the edges. I allowed a lot of the Neutral Gray to show thru the textured color.


I have transferred the mustache. 
I used the same stencil brush but added a bit more Light Buttermilk to make it lighter. 
 I based the mittens with Honey Brown and shaded them with Milk Chocolate. 
I often use a Large Ultra Round Brush for shading and a Maxine Mop.


The Lowell Cornell Ultra Rounds come in a variety of sizes 
and 
hold a lot of WATER which make them perfect for floating color!



I have base coated the pail.


I have now started shading the coat with Neutral Gray.


I added the stars on the hat band with a stencil.


I am now starting to work on the eyes. 


I base coated the eyes first with Light Buttermilk. 
The iris are painted with Wedgewood Blue
The pupil is Lamp Black.


I decided to add some wood buttons to the coat. 
I painted the button Honey Brown.


I am now working on shading the facial features,

I like to use Silver Ultra Micron Mini brushes for this.



I am working on the eyebrows now.


I am now starting to work on the beard.


Close up of the face and beard.


I painted in the line to connect the buttons with Honey Brown.

I sealed my Santa and fish with several coats
 of 

I like to use the MATTE but it does come in a variety of finishes.

On a large piece such as this I often pour a small puddle of varnish in the center of my surface. 
I then work with a large varnish brush spreading the varnish towards the outer edges of the surface. 

It is important to let each coat of varnish dry completely before adding the next coat to avoid a cloudy look.


I apply additional coats of varnish in the same manner but I use a sponge.


"Deep Navy Blue" mix I made using Midnite Blue and Lamp Black (1:1)


I painted the centers of my wood buttons with the "Deep Navy Blue" mix. 
I used my drill and a small bit to drill holes on either end of the 
Honey Brown lines I painted that will connect the buttons.


I used  thin rusty wire as "thread" for my wood buttons. 
I used pliers to cut the wire then I "threaded" it thru the holes on the buttons. 
I left enough wire to secure the buttons to my surface from the back. 
I trimmed the excess wire once I secured the buttons. 


I lined up the buttons on the coat. 
I attached them with the wire thru the holes I had drilled.
I added larger buttons to the cuffs of the coat.


I attached screw eyes to each of the fish noses. 
I cut about a 16" piece of rusty wire to thread the fish together.


I drilled a hole and attached the fish to my surface. 
I left some "loose ends" of the rusty wire at the top part of his hand.


Rosemary Reynolds and DecoArt 
provided the products and paint to complete this project as part of their 
Helping Artist and DecoArt Blogger Programs.
Thank you DecoArt!







I hope you have enjoyed watching me paint my 
Seaside Santa Dummy Board.

A bit of history regarding "Dummy Boards"

"Dummy Boards" were first brought to this country during colonial times. They were cut from flat boards. These whimsical figures were painted to resemble men, women and children and sometimes plants or animals. They were freestanding and were often placed near a fire place with their backs to the wall and served to "provide a presence" in an empty room.

Happy Painting !

Lynn



Sunday, April 23, 2017

Thyme to show you Sweet Treats Santa


A couple of months ago my good friend 
Jane Allen 
asked me if I would paint her 
Sweet Treats Santa 
and 
blog about him.
Of course I said yes!


The pattern  for this project can be found in the book
Jane and Amy Create Christmas.

The book is co- authored 
by 
Amy Mogish 
who is another favorite designer of mine.

You can purchase the wood kit for this Santa

HERE

You can purchase the book

Jane and Amy Create Christmas

HERE


Lets step inside my STUDIO and get started!

My Palette


Antique Rose, Burnt Umber, Black Plum, Camel, Deep Burgundy, Dove Grey, Evergreen, Flesh Tone, Foliage Green, Forest Green, Light Buttermilk, Raw Sienna, Sand, Slate Grey, Soft Black, Spice Pink, Tomato Red, Warm White, Zinc.



Emperors Gold
Americana Decor Metallics Tin



Yesteryear




I began by sanding my surface lightly.
I sealed the wood and tin with Multi-Purpose Sealer




I base coated the coat and hat with Antique Rose.


I used a Tim Holtz Collection Stencil ( Flourish THS032) for his coat. 
I used a small stencil brush and Tomato Red to stencil the design on the coat.


I divided his coat into 4 sections and started in the lower left corner and then flipped to the right. 
I then positioned the stencil to do the top right and flipped to do the top left.


I then used a piece of Punchinello to stencil the hat with  Tomato Red. 


I base coated his face with Flesh Tone.  I base coated the fur with Camel, mittens with Forest Green. The hair, beard and mustache are Slate Grey. Boots are Soft Black


I have started working on the facial features.


I use Silver Micron Mini brushes for detail work such as the facial features.


Close up of face.


I am now painting the mustache and eyebrows.


I stroked Dove Grey on the eye brows, mustache, and beard. 
I then added  Light Buttermilk strokes followed by Warm White


I'm adding some shading under the mustache.


A closer look at face so far.




I have transferred on the remaining details using graphite paper.


When I shade I either use a 1/2" Scharff FLAT brush 
or 
I especially like to use a #8 or #12 Lowell-Cornell Ultra Round brush
I always have a Maxine Mop in hand!


Ultra Round brushes hold a lot of water!





I am shading the arms of his coat and also the hat with Deep Burgundy
I deepened the shading with Black Plum.
I shaded next to the cuff and the bottom of the mittens with Evergreen.



I am going to start working on the fur now.


I did a short You Tube video below demonstrating painting the fur.

CLICK on the lower right hand corner of video for view FULL SCREEN



Fur painting video.



Close up of fur on hat as I was painting it. I first floated the edges with Raw Sienna. I reinforced it with Burnt Umber. I used a 20/0 liner brush to stroke on the fur. I painted tiny strokes following the direction of the fur. I stroked Burnt Umber around the outside edges, I worked toward the center of the fur adding Raw Sienna strokes. I then went over all the fur with strokes of Camel. The last step was to add highlight strokes of Light Buttermilk.


Completed fur on hat.


I'm working on the coat fur.


I have shaded the cuffs and ball on hat prior to painting the fur.


The fur on hat is complete. I am working on the cuffs.


I decided I had too much white showing on the eyes.
This is the before and after pictures showing the changes.


Close up showing the changes to the eyes.


Another close up view of face.




I'm working on the belt and buckle.


I am now base coating the gingerbread with Camel.


I have shaded the gingerbread with Raw Sienna .
I reinforced the shading in the darkest areas with Burnt Umber.
I have painted the icing around the edges of the gingerbread.


I have painted the eyes and buttons on the gingers. 
I have also painted the bakers twine on the necks of the gingers.



Close up of painted gingerbread men. 


Another close up of painted gingerbread men.


He really is looking like one SWEET guy!


I have painted the holly on the hat.


I used my graphite paper to add the cake to his left arm


The next goodie I will be painting is the cake.


I love using my Silver Micron Mini for painting all the tiny details in this project.


I am now painting the cake.


"The icing on the cake."


I love all the sweet goodies.....there are many more to paint!


I am now starting to paint the cupcakes in the basket.


I have painted the cupcakes.
I am working on the pie, the basket is base coated in Camel.


I have painted the lattice work on the pie.


I will now begin painting the basket.


I am painting the weaving on the basket.


I am continuing to work on the basket.


I've added some shading to the basket.


It's always good to step back and look at your work as you go along
to see if you need to make any changes. 
I always notice changes that I want to make by looking at my photos.
Do you see anything you would change?


As you can see the two sides of the basket are different.....now how did I do that? !!


I have fixed the basket .
 I added the remaining details to it.


I am now going to work on the pack.


Sweet Treats pack.


I have finished painting the pack


I now will paint all the goodies for the pack.


I am now painting the stencil design on the back of the coat.


I am painting the fur on the back side of the hat. 
I have painted the hair on the back side.


I decided to make some goodies of my own to add to this project!


I took 2 1/2" wood balls and painted them Camel. 
 It took about 2 coats. 



I let them dry completely.
I frosted each ball with
using my palette knife. 




I found some green glittered scrap book paper.
I drew tiny holly leaves on the back of the paper.


I cut out all the tiny holly leaves.



I stuck the leaves in the "frosting" while it was still wet.


I cut the red berries off their wired stems with small pliers.



I added the "berries" to the icing while it was still wet.


How SWEET!


I sprinkled Deco Art Glamour Dust on the completed cookies while the " icing" was still wet.
I carefully shaded under the "icing" line 
with 
Burnt Umber 
to give the cookies 
"baked" appearance.


Now to add the "cup cake" papers.



I put a tiny dab of glue on the bottom of the cookies. 
then set them in the cup cake papers and let them dry.


They look good enough to eat!


I am now going to use the checkerboard stencil to work on the base of the Santa.


Finished checks.



After the checks were dry I used the punchinello again to stencil around the edges of the base.


I decided to add another of my own touches to this project.


I found an old wood lazy susan at a thrift shop.


The surface had a smooth somewhat shiny finish. 
I painted the surface with Yesteryear Chalky Finish paint.
This served as a "primer" for the surface  in addition to applying a stain blocker first.




I used an American Decor Flat Brush to apply the paint.




I let that dry well.


I keep a small blow dryer near my table to speed the drying times.


I painted the underside of the surface in the same manner as the top.


I wanted the surface to appear like a metal tray.


Next I painted the surface 
with 

It made the surface look exactly like a wanted! A shiny tray.


I started painting the tiny treats for the pack.


I was looking at my tray when I had another idea!


Paper doilies!


I decided my tray needed a doilie.


I carefully applied
to the doilie with a sponge brush.




I let this dry well and then carefully added a couple additional coats of the product.


The tray is done.......but I couldn't stop there!


I'm painting the tiny treats for the pack on his back.


I used Americana Dura Clear Ultra Matte Varnish to seal my Santa. 
 I often apply the first coat of varnish with a large brush.



 I apply additional coats with a sponge.
Be sure to allow each coat of varnish to dry completely before apply the next coat to avoid clouding!


I am now making the tree for the back pack.


The pack is attached to the back with tiny screws.


I used floral sticks, wire and floral tape to prepare the goodies for the back pack. 


Then another idea popped into my head! Candy Canes!


To make these all you need is Dollar Store plastic candy canes.


Tear 3/4" strips of homespun. 
Wrap around your candy canes and secure with glue.



AND what do you have?


Old Thyme Candy Canes of course!


Well......I just couldn't stop myself! I was on a ROLL with ideas! 
So I rolled out my mixer.


Lets make some Ornamental Ginger Bread Dough!


You can find my 
Ornamental Ginger Bread Dough Recipe
and 
some other great craft recipes



They look good enough to eat!!!
I used cloves for the eyes.
I painted the icing on with Light Buttermilk.
I added Bakers Twine bows.


Of course I had to bake more! 
They make the whole house smell YUMMY!


They are so much fun to paint and decorate!
I added Dazzling Metallics Twinkles for sparkle!



They look like REAL cookies don't they?


Sweet treats!


So remember the tray?


I attached the base to the Santa with a screw. 
I then attached the base to the tray from underneath with a couple screws.



I arranged the Sweets I made on the tray!

I saved some of the "ornamental gingerbread cookies" I made
 and
put them in an old antique jar.

Are you ready to see him yet?




I added some of the 
Old Thyme Candy Canes 
I made to the back pack 
along with all the tiny treats I painted.


Front view.


Deco Art and Rosemary Reynolds
provided me with the paints and products to complete this project as part of their 
Helping Artist and Blogger Outreach Programs

Thank you DecoArt!







I hope you have enjoyed watching me paint 

Jane Allen's Sweet Treats Santa!

Thank you Jane for this wonderful project!




Happy Painting !

Lynn




Related Posts Plugin for WordPress, Blogger...